FS Fire Shutter

Roché fire shutters have been tested and approved  in accordance with BS 476: Part 22 and are documented in report references WARRES No. 61083 and WF No. 182970.  Warrington Fire WF Assessment Report 181246 Issue 2 provides for modifications for fire shutters to be capable of satisfying the integrity performance criterion for fire resistance for a period of 120 or 240 minutes.

Applications

Commercial sites where fire protection is required, up to 15M².

Curtain Slat

Single Skin 76mm Curved Steel

Standard galvanised finish

N.B. The FS fire shutter profile can be powder coated any colour as required.

Profile Height                    76mm

Weight per m2                  12kg

Maximum Width              5000mm

Maximum Surface           15m2  

Housing

Manufactured from 0.9mm galvanised steel sheet.

End caps are fabricated from 3mm steel.

Standard galvanised finish. Other colours available on request.

Enclosure Height              Guide Length

(mm)                                     (up to mm)

305                                        <2600

350                                         >2600

N.B. The above enclosure sizes are based on standard tube motor operation.

Guide Channels / Bottom Slat

Galvanised steel sections.

Guide channel depth will vary dependent on application from 50mm to 100mm.

Standard galvanised finish. Other colours available on request.

N.B. The guide channels are bolted to fixing angles to suit the application.

Operation

Electric: Single phase tubular motor with push button control or key switch as standard. Interface panel for connection into the fire alarm. The shutter descends when the fire alarm signal is received.

N.B. Manual operation via a fuse link is possible, but not recommended.

Options:

Audio-visual display & timer delay.

Battery back to ensure effective operation in the event of power failure.

To learn more about this product, click here to Contact Us.