Roller Garage Doors.

CURTAINS:

The standard garage door profile is a 77mm roll formed section with polyurethane foam installation. The weight per square metre is 7kg and is utilised for widths of up to 5.5m (18 feet). Greater spans can be achieved with alternative profiles. A range of standard colours is available (see chart below). A 55mm profile can be utilised in situations where headroom above the opening may be an issue, although the span is limited to 3.5m (12 feet). To utilise the 55mmm profile the opening height should not exceed 2150mm.

END LOCKS:

PVC moulded free run, secured with aluminium rivets.

BOTTOM RAIL:

Extruded aluminium with a dual formed extrusion weather seal.

GUIDE CHANNELS:

Powder coated extruded aluminium with a protective brush.

Dimensions:

Width 90mm x Depth 34mm for 77mm profile.

ROLLER ENCLOSURE:

Housing sizes:
250mm (10 inches) accommodates an opening of up to 1950mm (6 feet 5 inches). 300mm (12 inches) accommodates an opening of up to 3000mm (9 feet 10 inches). 250mm (14 inches) accommodates an opening of up to 4500mm (14 feet 9 inches). The 55m profile is designed to roll into a 205mm (8 inch) housing for low headroom applications.

MOTOR:

A Somfy CE marked electric tubular motor with automatic limit controls. A manual override facility ensures the doors can be opened in the event of a power failure.

REMOTE CONTROL:

A rolling encrypted code is transmitted for each signal. An integrated courtesy light activates on operation and long life lithium batteries power the key-fob handsets. Inbuilt safety sensors ensure safety is not compromised.